CC1500 LINEAR TRANSDUCER  

 

APPLICATION

The CC1500 linear transducer was originally designed for steel mill screwdown position control which requires a high degree of reliability in a hostile environment including heat, liquids and dirt. Other applications include coil cars, side guide positioning, down coilers, and continuous casting position control.

FEATURES
  • Precise absolute measurement
  • Serial digital output: SSI CANbus, ProfiBus, InterBus, DeviceNet .0 - 10v, 4 - 20mA
  • Analog outputs: 0 - 10VDC, 4 - 20ma
  • Wide temperature range: -40 to 185oF
  • High resolution: 2 micron (0.00008 in.)
  • Stroke lengths: up to 25ft

 

ELECTRICAL SPECIFICATIONS

Linearity

+ 0.01% of full scale *

Resolution

- 2 microns (0.00008 inch) at maximum of 10,000 measurements per second standard

Repeatability

- +0.001% of full scale or +0.002mm (0.0001 inches), whichever is greater

Non-Linearity Uncorrected

- <+0.02% of full scale or +0.002 inches, whichever is greater

Hysteresis

- <0.004mm (0.00015 inches)

Operating Temperature

- -40 to 85oC (-40 to 185oF)

Outputs

  Analog

- Voltage (Range: 0 to +10VDC, reverse acting)

Current (4 to 20mA grounded, reverse acting) (0 to 20mA grounded, reverse acting)

Dual outputs of a common type: position and velocity or two positions

  Digital

- SSI (Serial Synchronous Interface), CANbus

Analog Adjustability

- 100% adjustment of zero and span points

Stroke Lengths

- 25 to 7600mm (1 to 300 inches)

Operating Voltage

- +24VDC (+15%, -10%)

* Linearization Data supplied for improved linearity.

PRODUCT DIMENSIONS

Dimensions = Inches (mm)

  • 5.00(127) diameter at connector
  • 3.0(76) cylinder diameter
  • O.A.L. dependent on length of traver

ORDERING INFORMATION

Example:

CC1500L

1

G

4

L

A

B

C

D

A) Data Length

_____1 = 25 Bits
_____2 = 24 Bits

B) Output Format

_____B = Binary
_____G = Gray Code

C) Resolution

_____1 = 0.0002 in. ( 0.005 mm )
_____2 = 0.0004 in. ( 0.01 mm )
_____3 = 0.002 in. ( 0.05 mm )

_____4 = 0.004 in. ( 0.1 mm )
_____5 = 0.0008 in. ( 0.02 mm )
_____6 = 0.00008 in. ( 0.002 mm )

D) Performance

_____S = Standard
_____L = Linearization Package

Back To Products Page

Printer Friendly Page

-